Second Skin Overkill Pro Closed Cell Foam – High Density Polyethylene Foam Decoupler – Made in USA

Foam products are an excellent supplement to any vehicle sound insulation project. OverKill Pro is the thicker version of our flexible, rubber infused closed cell foam. Closed cell foams will do some work absorbing low-frequency sound waves and reducing distortions caused by sound ...Foam products are an excellent supplement to any vehicle sound insulation project.

OverKill Pro is the thicker version of our flexible, rubber infused closed cell foam. Closed cell foams will do some work absorbing low-frequency sound waves and reducing distortions caused by sound waves in the door panel, but that's not what they are best at. OverKill Pro is an excellent decoupling material, and is often used to stop rattling panels or preventing other hard surfaces from smacking into each other.

Install it anywhere you have rattling plastic, like the door panel, side panels, or even under cupholders. Features3/8 thick rubber infused closed cell foam - Highly water resistant - Adds substantial thermal insulation (closed cell foam R-value per inch: 4.33)Excellent decoupler to combine with Luxury Liner or install between rattling panels - Each sheet is 24 x 54 (9 Sq Ft)Weight = 0.15 lbs per square foot - Service temperature range: -40F to 165F (intermittent to 200F)Comes with peel and stick backing or you can choose your own adhesive - Made in the USA Specs Size Options 1/8" or 3/8" Square Foot Coverage 24 x 54 (9 Sq Ft) Weight 1.35 lbs per sheet Adhesive Options Peel & Stick or No Adhesive Temperature Rating -40F to 165F Thermal Insulation Rating (R-value) 4.33 per inch Resources Install Guide OverKill Install Guide Material Testing Tested Properties Testing Method - Performance Chrysler, Ford, GM, Toyota Company Specific Approved Hardness, Toughness ASTM D 2240 40 +/-10 (Shore 00) - "very soft" Compression Resistance UL50 Suitable as gasket material Compression Deflection (25%) ASTM D 1056 2.0 - 5.0 psi Flammability FMVSS-302, UL94 V-0, UL94 HF-1 Pass Fungus Resistance ASTM G 21 Pass Tear Strength ASTM D 624 9 lbs/in Tensile Strength &n