Intbuying Automatic Platform Paint Shaker Mixer Machine

Specification Voltage: AC110V, 60Hz Power: 0.75KW Phase: Single phase Mixing range: 0.5-20L(0.13-5.28GAL) Equipment keeping environment temperature: -20~50 Using environment, operating temperature: -10~40 Humidity: 35%90%No frost Max mixing weight: 30KG/521.4lb Operation way ...Specification Voltage: AC110V, 60Hz Power: 0.75KW Phase: Single phase Mixing range: 0.5-20L(0.13-5.28GAL) Equipment keeping environment temperature: -20~50 Using environment, operating temperature: -10~40 Humidity: 35%90%No frost Max mixing weight: 30KG/521.4lb Operation way: continue shake up and down Use notice: 1) This machine is suitable to mix the non-volatile liquid not the food liquid. 2) This machine must connect to the earth, or will have the danger of shocked by electricity. 3) Only the special technique worker or the people trained can do the work of installation and operation and maintenance.

4) Mustnt operate the machine without any paint can inside the machine. 5) Take care of the machine surface to avoid any damage; machine should put on the firm and level place. 6) Cut off the electricity before maintenance and check to avoid any unexpected start operation.

7) Mustnt leave any tools or sundries inside of the machine. 8) Should assure the function complete of the machine after the maintenance. 9) The installation environment should apply to the local environment (published by the authority department).

Dont pile the paint can around the machine, mustnt store the tinder inside the machine. Should cut off the power and take out the paint can after work. 10) Should put a MUSTNT SMOKE sign at the 5 meters place aside the machine, mustnt use the machine within the tindery and explosive environment.

11) If there is any expected voice, press the emergency bottom to stop the machine and restart the machine again after check and solve the malfunction. Process and methods of using the machine: 1. First open the packaging, take the machine out and put it on the firm and level ground (if the ground is not level, readjust the 4 legs of machine to make sure it will work on a level place) 2.

Must take off the steel bar first to operate the machine. A: Turn the hand wheel anticlockwise to raise the clamping board to the max height which is suitable for the big can. B: Will see a steel bar and sheath when open the clamping board.

C: Knock down the steel bar and sheath. D: Nothing will be seen in the shaking frame. E: Push the uphold board with hand gently, it should swing freely F: Should take off the hand wheel from the shaking frame before connect the machine to the electric power.

G: Insert the electric plug into the AC110V tri-case electric outlet which should connect to the earth. 3. Open the front door and press the paint can cover firm and put it into the machine, turn the hand wheel according to the arrow direction to clamp firm the paint can, and then make firm the screw deasil.

4. Close the front door and reposition the emergency button to start the machine. 5.

Turn the TIMER according to your need, and then the machine starts to work. (The longest time can be 15 minutes) 6. Press the EMERGENCY to stop the machine in urgent (Dont forget to reposition the EMERGENCY to restart the machine next time) 7.

There is a safe guiding button at the left side of the front door, the machine will stop when the front door is not close firm or is open during operation. 8. When time is due, the TIMER will automatically stop the machine with a sound of Ding.

The operator can open the front door at this time and loosen the locknut in the direction of anticlockwise, turn the hand-wheel according to the arrow direction , loosen the press board and then take out of the paint can.